top of page

CABLE MANAGEMENT

Data-cable-management.jpg

ADDS, MOVES & CHANGES (MAC)

As your business grows, it also changes. Adding or relocating employees – or even physical relocation office is simply a matter of course in a successful modern business. Moves, Adds and Changes (MAC) to communications systems can be both disruptive and expense. Most inter-company IT groups are overburdened with routine day-to-day activities. So why not let KidrenCorp take care of it?

backbone-cabling (1).jpg

BACK BONE INSTALLATIONS:

Backbone cabling systems refers to the process of providing interconnections between telecommunication and equipment rooms. Installation includes backbone cables, intermediate and main cross-connects, mechanical terminations, and patch cords or jumpers used for backbone-to-backbone cross-connections. The backbone can also extend between buildings. 

Some points specified for the backbone cabling subsystem include: 

​

  • Equipment connections to backbone cabling should be made with cable lengths of 30m (98 ft.) or less.

  • The backbone cabling shall be configured in a star topology. Each horizontal cross-connect is connected directly to a main cross-connect or to an intermediate cross-connect, then to a main cross-connect.

  • The backbone is limited to no more than two hierarchical levels of cross-connects (main and intermediate). No more than one cross-connect may exist between a main and a horizontal cross-connect and no more than three cross-connects may exist between any two horizontal cross-connects.

  • A total maximum backbone distance of 90m (295 ft.) is specified for high bandwidth capability over copper. This distance is for uninterrupted backbone runs. (No intermediate cross-connect).

  • The distance between the terminations in the entrance facility and the main cross-connect shall be documented and should be made available to the service provider.

  • Recognized media may be used individually or in combination, as required by the installation. Quantity of pairs and fibers needed in individual backbone runs depends on the area served.

catv.jpg

CABLE TV (CATV) ADDITIONAL LINES

Cable television is a system of providing television to consumers via radio frequency signals transmitted to televisions through fixed optical fibers or coaxial cables. This method differs from the over-the-air method used in traditional television broadcasting (via radio waves) in which a television antenna was required or, more recently, a digital ATSC tuner. Cable TV service providers may also offer radio (FM) programming, high-speed internet, telephony, and similar non-television services.

cctv.png

CLOSED-CIRCUIT TV INSTALLATION (CCTV):

As the name implies, Closed Circuit Television (CCTV) is a system in which the circuit is closed and all the elements are directly connected. This is unlike broadcast television where any receiver that is correctly tuned can pick up the signal from the airwaves. Probably the most widely known use of CCTV is in security systems and such applications as retail shops, banks, government establishments, etc. The true scope for applications is almost unlimited – from monitoring traffic on a bridge – to aerial photography from a hot air balloon. KCS installs CCTV video surveillance systems to meet your budget requirements.

bottom of page